空间目标高分辨距离像运动参数估计

建立了宽带线性调频雷达信号的空间目标回波模型，对目标回波信号进行了分析，分析了空间目标高速运动对目标高分辨一维距离像的影响，提出了用多项式变换进行参数估计的方法。利用估计参数进行运动补偿，消除目标速度和加速度对目标一维距离像的影响。最后给出了仿真结果，验证了本文的分析结果正确和算法有效。     

物—伞系统运动稳定性初探

弹道－升力式再入飞行器常采用旋成体外形，但其质心偏离对称轴（纵轴）设置。这种飞行器在着陆前要采用降落伞作为主减速手段。研究质心偏离对称轴的旋成体与降落伞组成的系统的运动稳定性是一项有工程实践意义的课题。作为一种初步探索，在把降落伞视作刚体的条件下，按该系统平面运动方程考察其在平衡状态附近的稳定性，给出了运动稳定性判据。     

多个自由飞行空间机器人协调操作运动规划

本文提出了在空间微重力环境下多个自由飞行空间机器人协调操作运动规划算法，首先推导出多个自由飞行空间机器人协调操作的广义雅可比矩阵，其次给出了基于该矩阵的多个自由飞行空间机器人协调操作分解运动速度控制算法，最后用计算机仿真验证了该算法的正确性。     

有向拓扑下无径向速度测量的多导弹协同制导

针对多枚导弹在平面内从各自期望的方向同时击中移动目标问题，提出一种有向通信拓扑下无需导弹-目标径向速度测量且带视线角约束的分布式有限时间协同制导律。基于平面内导弹-目标相对运动方程建立带视线角约束的多导弹协同制导模型。基于二阶多智能体协同控制理论设计了视线方向上的制导律，可保证有向拓扑下多导弹的打击时刻在有限时间内达到一致。基于齐次系统稳定性理论和积分滑模控制理论设计了视线法向方向上的制导律，可保证多导弹击中移动目标且视线角在有限时间内收敛到期望值。仿真校验所设计的协同制导律在理想条件下可使有向拓扑下的多导弹从各自的期望方向同时击中移动目标。     

一种基于相对位置约束的双星定位方法

全球卫星定位系统(GNSS)需要至少4颗卫星才能提供持续、准确的定位结果。在有障碍物遮挡的城市街道、山谷或者存在压制式干扰的战场环境中,往往会出现可见星数量降低至4颗以下的情况。针对只有2颗可见星的定位问题,提出了通过相对位置变化对绝对位置进行解算的定位模型,证明了该模型的可行性,并研究了该模型的数值计算方法和几何搜索方法。仿真实验和实际跑车试验表明,在只有2颗可见星条件下,该方法的定位精度明显优于传统的INS/GNSS紧组合算法,并且对初始位置的精度不具有依赖性。     

Motion prediction of a non-cooperative space target

Capturing a non-cooperative space target is a tremendously challenging research topic. Effective acquisition of motion information of the space target is the premise to realize target capture. In this paper, motion prediction of a free-floating non-cooperative target in space is studied and a motion prediction algorithm is proposed. In order to predict the motion of the free-floating non-cooperative target, dynamic parameters of the target must be firstly identified (estimated), such as inertia, angular momentum and kinetic energy and so on; then the predicted motion of the target can be acquired by substituting these identified parameters into the Euler’s equations of the target. Accurate prediction needs precise identification. This paper presents an effective method to identify these dynamic parameters of a free-floating non-cooperative target. This method is based on two steps, (1) the rough estimation of the parameters is computed using the motion observation data to the target, and (2) the best estimation of the parameters is found by an optimization method. In the optimization problem, the objective function is based on the difference between the observed and the predicted motion, and the interior-point method (IPM) is chosen as the optimization algorithm, which starts at the rough estimate obtained in the first step and finds a global minimum to the objective function with the guidance of objective function’s gradient. So the speed of IPM searching for the global minimum is fast, and an accurate identification can be obtained in time. The numerical results show that the proposed motion prediction algorithm is able to predict the motion of the target.     

航天器分裂体或抛射物的轨道形成和演化

由卫星和碎片爆炸或相互间碰撞所产生的分裂体,或由在轨航天器向外抛射所产生的抛射物,对空间环境的影响正日益增大。对它们轨道形成和演化的研究可以为分析空间解体事件提供一种有效方法。本文利用Kep-ler运动积分以及受摄二体问题的分析解,建立了分裂体或抛射物的轨道形成及其演化与分裂或抛射速度之间的关系,从而为理解以各个方向、不同大小的速度分裂或抛射的物体的轨道演化特征提供理论依据。文章最后通过数值验证表明了该方法的有效性。     

Real-time trajectory planning for UCAV air-to-surface attack using inverse dynamics optimization method and receding horizon control

This paper presents a computationally efficient real-time trajectory planning framework for typical unmanned combat aerial vehicle (UCAV) performing autonomous air-to-surface (A/S) attack. It combines the benefits of inverse dynamics optimization method and receding horizon optimal control technique. Firstly, the ground attack trajectory planning problem is mathematically formulated as a receding horizon optimal control problem (RHC-OCP). In particular, an approximate elliptic launch acceptable region (LAR) model is proposed to model the critical weapon delivery constraints. Secondly, a planning algorithm based on inverse dynamics optimization, which has high computational efficiency and good convergence properties, is developed to solve the RHCOCP in real-time. Thirdly, in order to improve robustness and adaptivity in a dynamic and uncer- tain environment, a two-degree-of-freedom (2-DOF) receding horizon control architecture is introduced and a regular real-time update strategy is proposed as well, and the real-time feedback can be achieved and the not-converged situations can be handled. Finally, numerical simulations demon- strate the efficiency of this framework, and the results also show that the presented technique is well suited for real-time implementation in dynamic and uncertain environment.     

基于加权最小二乘法的椭圆轨道编队飞行设计

提出了一种不依赖于相对运动描述的偏心率编队飞行设计方法。利用加权最小二乘法，根据事先所确定的理想相对运动轨迹，就能设计出与之最接近的相对运动轨道。这种方法适用于任意偏心率，并能很容易地加入各种摄动力的影响。仿真验证了其有效性。     

拓扑优化与增材制造结合:一种设计与制造一体化方法

被誉为"第三次工业革命"的增材制造技术通过材料层层累加的方式实现结构的制备,这种独特的制造方式实现了高度复杂结构的自由"生长"成形,极大地拓宽了设计"空间",为新型结构及材料的制备提供了强大的工具。制造工艺的飞速发展往往需要设计技术的快速跟进,拓扑优化方法因其不依赖初始构型及工程师经验,可获得完全意想不到的创新构型,已成为结构创新设计的重要工具。因此,将拓扑优化(先进设计技术)与增材制造(先进制造技术)融合,发展面向增材制造的创新设计技术具有广阔的前景。从面向增材制造的优质结构构型设计以及考虑增材制造工艺约束的拓扑优化设计方法两个方面,介绍了现阶段基于拓扑优化方法所建立的结构创新设计理论,并指出未来研究的趋势。